Eldes (Элдис)- GSM охрана

ELDES EW1B - wireless device with 2 zones and 2 PGM outputs. This module is designed to work with systems Eldes and expands the possibilities of wireless communications. From the module to the system, you can connect a variety of additional devices such as motion detectors, sirens, magnetic door contacts. Also, using this module to the system, you can connect and control two appliances: lighting, heating, etc. EW1B has available 3 battarei and enclosure type IP65.

GSM alarm EPIR3 is a unique product that combines the wireless alarm panel, motion sensor with protection from pets and GSM module. EPIR3 supports Ademco Contact ID protocol and transmits the event to the control of the companies. Supports all modern channels of communication: GPRS, CSD, GSM VOICE, SMS. GSM alarm EPIR3 compatible with virtually any remote controls and monitoring programs. Alarm EPIR3 supports cloud server Smart Security, which allows you to manage and monitor your security system via mobile applications or web-service. Thanks to the quick and simple construction, installation of security system takes only a few minutes. If you move, you can easily transfer your security system to the new premises. EPIR3 supports the connection of additional sensors and wireless devices with integrated wireless modules working in secure bilateral RB. EPIR3 able to work independently up to 24 hours if the main power supply. In this case, the user and / or the security company will be informed about the power failure a special message. When an alarm or any right time you can listen to the secured area. Your house is under full control!

EWT2 module as an option to connect to the wireless sensors GSM alarm system EPIR. When the wireless module to the system EWT2 EPIR can connect up to 16 wireless devices ELDES: IR sensors EWP1, expansion modules EW1, expansion modules EW2, sirens and EWS1 EWS2, magnitokontaktnye EWD1 sensors and radio trinkets EWK1. Using receiver module EWT2 can significantly extend the functionality of GSM system EPIR, increasing the number of protected premises, and also allows the use of additional devices, such as wireless sirens and trinkets. Setting the wireless module EWT2 made ​​in Case GSM sensor EPIR ELDES

EKB3W - a wireless LED keypad designed for use with EPIR2 / 3, ESIM264/364. Keyboard allows you to manage and configure the security system.

EWD2 - a wireless sensor designed to protect doors, windows and other opening mechanisms. EWD2 equipped with tamper tamper switch and detachment from the surface, and has an additional buffer zone wired to connect additional sensors.

EWR2 - Increases the range of your wireless device radio signal between the security systems ESIM364, EPIR3 and additional wireless devices. EWR2 has LED indicator to indicate successful data security system. Also integrated internal antenna in EWR2 provides connection for an external antenna wireless sensors, which comes bundled. The repeater function is also provided with LED error indication improper installation of backup batteries, which are supplied. EWR2 easily added to the system using software ELDES Configuration Tool or SMS messages. On a security system, you can connect up to 4 EWR2. EWR2 supports up to 32 wireless devices such as sirens, smoke detectors, door contacts, etc.

Wireless siren EWS3 designed for indoor installation. In case of alarm (siren is compatible with GSM devices EPIR2 / 3, ESIM264/364) wireless siren EWS3 generates loud sound and light signals (integrated LED-indicator) to repel intruders and attract attention.